Scaffold Tube and Scaffold Fittings
Kwikup sells Scaffold Tube and Scaffold Fittings for Modular Scaffolding Systems such as Kwikstage Scaffolding, Cuplock Scaffold and Layher Scaffolding.
Tubes have a 48.3mm outside diameter and the wall thickness of 4.05 the tubes are to be used with all types of couplers and fittings
Length: 0.6m, 0.9m, 1.2m, 1.5m, 1.8m, 2.1m, 2.4m, 2.7m, 3.0m, 3.3m, 3.6m, 3.9m, 4.2m, 4.5m, 4.8m, 5.1m, 5.4m, 5.7m, 6.0m, 6.3m, 6.5m
Double Coupler / 90 Degree Coupler
A strong drop forged connector, providing strength under load-bearing situations joining tubes at 90-degree angles.
Mass: 1.25 kg
External Joiner / Sleeve Coupler
External compression type fitting to connection scaffold tube end to end
Mass: 1.3 kg
Putlog Single Coupler
Used for joining putlogs or transoms to ledger tubes, providing a level unconstructed surface for planks and boards. Also used for securing ledgers to standards.
Mass: 1.0 kg
Double Putlog Coupler
Makes the connection of putlogs and transoms to standard scaffold tube while allowing scaffold boards to be laid on top of the tube.
Girder Gravelock Coupler
Solid one piece drop forged steel fitting providing quick and secure fixing to beams
Always to be used in pairs
Mass: 1.5 kg
Girder Swivel Coupler / Swivel Beam Clamp
Drop forged with swivel capability
Mass: 1.6 kg
The Hook and base plate is made up of mild steel. Alternative to RAC
Mass: 0.58 kg
Internal expanding type fitting to connection scaffold tube end to end
Mass: 1.3 kg
Connections to standard scaffold tube at any angle required.
Forged Steel piece, fit for 48.3MM tube
Forged Steel piece, scaffold stop-ends and scaffold guard board returns are neatly and efficiently locked into the correct positions to secure scaffolding
Used to attach ladders to scaffold