KwikUP Kwikstage System

Kwikstage system is a Modular Scaffold System which is most commonly used in Australia, New Zealand, United Kingdom, South Africa, Ireland and India by large and small builders. Due to the systems flexibility it's known to be strong, user friendly, easy to install and dismantle. Builders can use it to suit any shape, size and height of their Job.

Kwikstage type Scaffolding is used in the following areas:

What scaffold type would be most suitable for your job? Is the scaffold compatible to other systems available in the market? What is the resale value of the scaffold system? Is the system accepted by relevant Authorities?

Product

Description

Length in Meters

Mass kg
kwikstage K-Stage standard Scaffolding Systems

K-Stage Standard

Standards are vertical structural member of the scaffold system which are made from 48.3 OD X 4mm Tubes
Standards have "V" pressings in clusters at 495 mm centres, which provide location points for Transoms, Ledgers, Braces, Hopups etc and a spigot fixed at the
top.

3.0 m
2.5 m
2.0 m
1.5 m
1.0 m
0.5 m

17.5 kg
14.5 kg
11.5 kg
8.5 kg
6.0 kg
2.0 kg
kwikstage K-Stage ledger Scaffold Fittings

K-Stage Ledgers

Ledgers is horizontal member of the scaffold system also known as guard rails are made from 48.3 OD X 3.2 mm & 4 mm tubes. Ledgers fit into the upper "V" Pressings on the standards.

2.4 m
1.8 m
1.2 m
0.7 m

9.2 kg
7.0 kg
5.0 kg
4.3 kg
kwikstage K-Stage transom KwikUP Paint & Galvanized

K-Stage Transom

Transoms are made by welding two 5.00 mm angles back to back. Transoms fit into the lower "V" pressings on the standards to carry steel boards.

2.4 m
1.8 m
1.2 m
1.0 m
0.7 m

22.0 kg
13.5 kg
9.6 kg
8.0 kg
6.0 kg
K-Stage Steel Plank Galvanized Steel Planks

K-Stage Steel Plank

The steel plank spans between the transoms giving a non slip surface

2.4 m
1.8 m
1.2 m
0.7 m

15.0 kg
10.5 kg
6.5 kg
4.0 kg
kwikstage hop up K-Stage Scaffold Fittings

K-Stage Hop Ups

Board Stage Brackets / hopups fit into the "V" pressing of the standard which is nearest to the wall. The 2 & 3 BSB have holes into which tie bar pins are attached. They are used to provide cantilevered platform on the inside of the scaffold nearest the wall.

Bracket Type
1 Board
2 Board
3 Board

 

2.5 kg
6.0 kg
9.0 kg
kwikstage diagonal brace kwickup type Scaffolding Braces

Diagonal Braces

The diagonal brace is used to the full height of the scaffolding in a longitudinal direction.

3.6 m
3.2 m
2.7 m
2.4 m
2.0 m
1.7 m

13.5 kg
12.5 kg
11.0 kg
9.5 kg
8.5 kg
7.5 kg
Kwikstage Tie Bar K-Stage Formwork Frames

K-Stage Tie Bars

Tie bars have pins at each ends which fit in holes of 2 and 3 board stage brackets (hopups) to prevent the brackets from spreading and the planks from becoming dislodged.
Available in sizes of

2.4 m
1.8 m
1.2 m
0.7 m

7.0 kg
5.0 kg
3.0 kg
2.1 kg
End Toe Bracket Scaffold Fittings Couplers

End Toe Brackets

Fits into 'V' locating lugs on the standard at the end of a platform to hold the end
batten toe board vertically in place.

   1.5 kg
Toe Board Bracket Clamps kwikup

Toe Board Bracket

Clamps to the standard with a captive wedge to hold the batten toe board
vertically in place.

 

0.8 kg
Double C Clip Gantry Coupler Cuplock Type Scaffolding Systems

Double C Clip / Gantry Coupler

Used to Join Standards Back to Back