KwikUP Tubes Couplers

Product

Description

Mass kg
Galvanized scaffold tubes Painted tube

Tubes

Tubes have a 48.3mm outside diameter and the wall thickness of 4.05 the tubes are to be used with all types of couplers and fittings

Length: 0.6m, 0.9m, 1.2m ,1.5m, 1.8m, 2.1m, 2.4m, 2.7m, 3.0m, 3.3m, 3.6m, 3.9m, 4.2m, 4.5m, 4.8m, 5.1m, 5.4m, 5.7m, 6.0m, 6.3m & 6.5m

 

  
Forged & Pressed Double Coupler 90 Degree Coupler

Double Coupler / 90 Degree Coupler

A strong drop forged connector, providing strength under load bearing situations joining tubes at 90 degree angles.

 1.25 kg
external joiner Sleeve Coupler Scaffold Fittings

External Joiner / Sleeve Coupler

External compression type fitting to connection scaffold tube end to end.

 1.3 kg
putlog single Forged coupler

Putlog Single Coupler

Used for joining putlogs or transoms to ledger tubes, providing a level unconstructed surface for planks and boards.  Also used for securing ledgers to standards.

1.0 kg
girder gravelock coupler | Forged & Pressed coupler

Girder Gravelock Coupler

Solid one piece drop forged steel fitting providing quick and secure fixing to beams Always to be used in pairs

 1.5 kg
Girder swivel coupler Swivel Beam Clamp Scaffold Fittings

Girder Swivel Coupler / Swivel Beam Clamp

Drop forged with swivel capability

 1.6 kg
mills hook coupler Putlog | Scaffold Fittings

Hook Putlog /

Mills Hook Coupler

The Hook and base plate is made up of mild steel. Alternative to RAC

 0.58 kg
internal joiner Internal Joint Pin Scaffold Fittings

Internal Joiner /

Internal Joint Pin

Internal expanding type fitting to connection scaffold tube end to end

 1.3 kg
Swivel Coupler Scaffold Fittings Couplers (Forged & Pressed)

Swivel Coupler

Connections to standard scaffold tube at any angle required.

  
Scaffold Fittings halfcoupler Half Coupler Forged Steel piece Pressed

Half Coupler

Forged Steel piece