Scaffold galvanised steel plank for sale

Our scaffold galvanised steel plank are tested and approved as per Australian standards AS 1577-2013. The steel plank spans between the transoms giving a non slip surface. Used to make pathway in the scaffold structure and provides a safe walking platform.

KwikUP’s Scaffolding Steel Boards have been load tested for working load limit [WLL] 250Kg.  Our testing has been conducted in accordance with the following safety procedures:

  • Stiffness Test
  • Strength Test
  • Sliding Test
  • Coefficient of Friction test

In addition to the aforementioned performance tests, dimensional checks were conducted to determine the planks’ geometrical properties.

GEOMETRICAL OBSERVATIONS of Scaffolding steel boards as follows :

Prior to load performance testing, scaffold planks were examined for configuration requirements in accordance with the below referenced clauses of AS/NZS 1577. Dimensional and configurational details of the planks were recorded as follows:

 (Clause 1.5). The length of the planks was 2.4m (nom.) and the width 230mm (nom.): PASS

 The planks’ base metal thickness was measured to be 1.8mm.

 (Clause 1.9). The planks were stamped with the identification markings ‘KwikUP AS/NZS 1577:2013 WLL 250kg UDL’: PASS

 (Clause 6.4). End caps were welded to both ends of the scaffold planks. The end caps were fitted flush to the ends of the planks: PASS

 (Clause 6.5). The surface of the planks was perforated with 8.0mm (nom.) circular openings. The preformation openings had a nominal area of 50.3mm

 (Clause 6.5). All surfaces of the planks were free from burrs and sharp edges: PASS

 (Clause 6.6). The planks were fabricated from galvanised steel sheet to prevent corrosion: PASS

 Lateral bracing metal straps were welded between the bottom flanges at 0.8m and 1.6m on the 2.4m long planks.

Steel Board Dimentions

MassLength
15.0kg2.4m
10.5kg1.8m
6.5kg1.2m
4.0kg0.7m

Galvanised steel plank available for any project big or small

Call us today for more information or to speak to an expert. We provide some of the most competitive prices in Australia on all Steel products.

For a quote call 02 9729 2122

× How can I help you? Available from 10:00 to 21:00
//