1.8m Formwork V Frame

Board Stage Brackets / hopups fit into the ÒVÓ pressing of the standard which is nearest to the wall. The 2 & 3 BSB have holes into which tie bar pins are attached. They are used to provide cantilevered platform on the inside of the scaffold nearest the wall.

Tie bars have pins at each ends which fit in holes of 2 and 3 board stage brackets (hopups) to prevent the brackets from spreading and the planks from becoming dislodged

The bridging ledger is provided to achieve a clear span of 4.8m by eliminating the centre set of standards, whilst maintaining the continuity of the scaffold deck.

A strong drop forged coupler like the double coupler but more flexible as it connects scaffold tubes at any angle required.

A strong drop forged coupler that connects two Scaffold tubes of 48.3 OD providing strength under load bearing situations joining tubes at 90 degree angles.