No products in the cart.
Half coupler
Made to fit on Scaffold tube, can be used to manufacture any special components to be used on Scaffolding.
| Size | Weight | Item Description | Quantity | ||
|---|---|---|---|---|---|
| 48.3mm | 0.7 | No Description | |||
| default variation | 0.7 | No Description |
Related Products
Handrail post
Used for edge protection Ð slab or balconyÕs. Bolted into concrete with 14mm Dyna Bolts. ÊCompatible with all sizes of ledgers which makes it very versatile
| Size | Weight | Painted | Galvanised | Item Description | Quantity | ||
|---|---|---|---|---|---|---|---|
| 1.2 M | 6.15 |  | | Handrail post | |||
| default variation | 6.15 | | | Handrail post |
Steel Ladder Beam
Ladder Beams are made of standard 48.3 X 4 mm Tubes. Ladder beams give you versatality to span over difficult access locations.
| Size | Weight | Painted | Galvanised | Item Description | Quantity | ||
|---|---|---|---|---|---|---|---|
| 6.3 M | 80 | | | Steel ladder beam | |||
| 6.0 M | 72 | | | Steel ladder beam | |||
| 5.4 M | 64 | | | Steel ladder beam | |||
| 4.8 M | 55 | | | Steel ladder beam | |||
| 3.0 M | 35 | | | Steel ladder beam |
Kwikstage Standards
Standards are vertical structural member of the scaffold system which are made from 48.3 OD X 4mm Tubes. Standards have ÒVÓ pressings in clusters at 495 mm centres, which provide location points for Transoms, Ledgers, Braces,, Hopups etc and a spigot fixed at the top
| Size | Weight | Painted | Galvanised | Item Description | Quantity | ||
|---|---|---|---|---|---|---|---|
| 0.3 M | 3 | | | Standard Topper | |||
| 0.5 M | 3.6 | | | 0.5 m standard | |||
| 1.0 M | 6.5 | | | 1.0 m standard | |||
| 1.5 M | 9.15 | | | 1.5 m standard | |||
| 2.0 M | 12.15 | | | 2.0 m standard | |||
| 2.5 M | 14.7 | | | 2.5 m standard | |||
| 3.0 M | 17.5 | | | 3.0 m standard |
Toe board bracket
Toe baord brackets also known as toe board clips are Clamped to the standard with a captive wedge to hold the batten toe board vertically in place.
| Size | Weight | Painted | Galvanised | Item Description | Quantity | ||
|---|---|---|---|---|---|---|---|
| 0.3 M | 0.85 | | | Toe board bracket | |||
| default variation | 0.85 | | | Toe board bracket |
Bridging Ledger
The bridging ledger is provided to achieve a clear span of 4.8m by eliminating the centre set of standards, whilst maintaining the continuity of the scaffold deck.
| Size | Weight | Painted | Galvanised | Item Description | Quantity | ||
|---|---|---|---|---|---|---|---|
| 4.8 M | 26.5 | | 4.8 m Bridging Ledger | ||||
| default variation | 26.5 | | 4.8 m Bridging Ledger |