Internal Joint Pin
designed for rapid ‘end to end’ connection of standard scaffolding tubes
Size | Weight | Item Description | Quantity | ||
---|---|---|---|---|---|
0.3 M | 1.5 | No Description | |||
default variation | 1.5 | No Description |
Related Products
Kwikstage Tie Bars
Tie bars have pins at each ends which fit in holes of 2 and 3 board stage brackets (hopups) to prevent the brackets from spreading and the planks from becoming dislodged
Size | Weight | Painted | Galvanised | Item Description | Quantity | ||
---|---|---|---|---|---|---|---|
0.7 M | 2.5 | 0.7 m tie bar | |||||
1.2 M | 3.6 | 1.2 m tie bar | |||||
1.8 M | 5.2 | 1.8 m tie bar | |||||
2.4 M | 7 | 2.4 m tie bar |
Kwikstage Standards
Standards are vertical structural member of the scaffold system which are made from 48.3 OD X 4mm Tubes. Standards have ÒVÓ pressings in clusters at 495 mm centres, which provide location points for Transoms, Ledgers, Braces,, Hopups etc and a spigot fixed at the top
Size | Weight | Painted | Galvanised | Item Description | Quantity | ||
---|---|---|---|---|---|---|---|
0.3 M | 3 | Standard Topper | |||||
0.5 M | 3.6 | 0.5 m standard | |||||
1.0 M | 6.5 | 1.0 m standard | |||||
1.5 M | 9.15 | 1.5 m standard | |||||
2.0 M | 12.15 | 2.0 m standard | |||||
2.5 M | 14.7 | 2.5 m standard | |||||
3.0 M | 17.5 | 3.0 m standard |
Lap Panels
These are an alternative for the LVL Scaffold planks. Steel panels have a folded returned to lock in between steel boards. Lap plates / panels fills the gaps minimising trip hazard and deck weight variances.
Size | Painted | Galvanised | Item Description | Quantity | ||
---|---|---|---|---|---|---|
500 MM | Galvanized Lap panels | |||||
700 MM | Galvanized Lap panels |
LVL Scaffold planks
LVL Scaffold planks are Structural laminated veneer lumber and designed to be used as a non-modular scaffold plank as a part of a working platform in accordance with the requirements of AS/NZS 1576.1 and AS/NZS 1577.
Size | Weight | Painted | Galvanised | Item Description | Quantity | ||
---|---|---|---|---|---|---|---|
3.6 | 19.8 | Steel ladder beam | |||||
3 | 16.5 | Steel ladder beam | |||||
2.4 | 13.2 | Steel ladder beam | |||||
1.8 | 9.9 | Steel ladder beam | |||||
1.5 | 8.25 | Steel ladder beam | |||||
1.2 | 6.6 | Steel ladder beam |
Step down bracket
The first step onto a stair access or ladder access is always difficult due to site constraints, ground levels and base outs. The use of the adjustable step down bracket gives the comfort of adjustment to balance the variables so the step becomesbalanced when getting on or getting off a stair access at ground level.
Size | Weight | Painted | Galvanised | Item Description | Quantity | ||
---|---|---|---|---|---|---|---|
0.3 M | 4.3 | one step down bracket | |||||
0.3 M | 6.5 | Two step down bracket |