No products in the cart.
Ladder Hook coupler
these couplers secure the ladder to the scaffold.
| Size | Weight | Item Description | Quantity | ||
|---|---|---|---|---|---|
| 48.3mm | 1.1 | No Description | |||
| default variation | 1.1 | No Description |
Related Products
Steel Ladder Beam
Ladder Beams are made of standard 48.3 X 4 mm Tubes. Ladder beams give you versatality to span over difficult access locations.
| Size | Weight | Painted | Galvanised | Item Description | Quantity | ||
|---|---|---|---|---|---|---|---|
| 6.3 M | 80 |  | | Steel ladder beam | |||
| 6.0 M | 72 | | | Steel ladder beam | |||
| 5.4 M | 64 | | | Steel ladder beam | |||
| 4.8 M | 55 | | | Steel ladder beam | |||
| 3.0 M | 35 | | | Steel ladder beam |
Sole boards
Soleboards are hardwood timber planks used under Scaffold base jacks to provide greater load bearing capacity.ÊFor uneven ground levels you can use the adjustbale base jacks
| Size | Weight | Item Description | Quantity | ||
|---|---|---|---|---|---|
| 0.5 M X 230 MM | 4.3 | 0.5 m sole board | |||
| default variation | 4.3 | 0.5 m sole board |
Kwikstage Transoms
Transoms are made by welding two 5.00 mm angles back to back. Transoms fit into the lower ÒVÓ pressings on the standards to carry steel boards which make a safe working platform.
| Size | Weight | Painted | Galvanised | Item Description | Quantity | ||
|---|---|---|---|---|---|---|---|
| 0.5 M | 5.8 | | | 0.5 m transom | |||
| 0.7 M | 6.1 | | | 0.7 m transom | |||
| 1.0 M | 7.2 | | | 1.0 m transom | |||
| 1.2 M | 9.8 | | | 1.2 m transom | |||
| 1.8 M | 15 | | | 1.8 m transom | |||
| 2.4 M | 21 | | | 2.4 m transom |
Scaffold U head Jack
U shaped head to support a standard or vertival pole over a scaffold standard. It is attached to a solid thread rod. which is 500mm long and 34 mm OD
| Size | Weight | Painted | Galvanised | Item Description | Quantity | ||
|---|---|---|---|---|---|---|---|
| 34 OD X 650 mm x 8 MM | 9 | | U Head Jack | ||||
| default variation | 9 | | U Head Jack |
Lap Panels
These are an alternative for the LVL Scaffold planks. Steel panels have a folded returned to lock in between steel boards. Lap plates / panels fills the gaps minimising trip hazard and deck weight variances.
| Size | Painted | Galvanised | Item Description | Quantity | ||
|---|---|---|---|---|---|---|
| 500 MM | | Galvanized Lap panels | ||||
| 700 MM | | Galvanized Lap panels |