Kwikstage Ledger Banana
Size | Weight | Item Description | Quantity | ||
---|---|---|---|---|---|
0.3 M | 0.2 | No Description | |||
default variation | 0.2 | No Description |
Related Products
Toe board bracket
Toe baord brackets also known as toe board clips are Clamped to the standard with a captive wedge to hold the batten toe board vertically in place.
Size | Weight | Painted | Galvanised | Item Description | Quantity | ||
---|---|---|---|---|---|---|---|
0.3 M | 0.85 | Toe board bracket | |||||
default variation | 0.85 | Toe board bracket |
Kwikstage Transoms
Transoms are made by welding two 5.00 mm angles back to back. Transoms fit into the lower ÒVÓ pressings on the standards to carry steel boards which make a safe working platform.
Size | Weight | Painted | Galvanised | Item Description | Quantity | ||
---|---|---|---|---|---|---|---|
0.5 M | 5.8 | 0.5 m transom | |||||
0.7 M | 6.1 | 0.7 m transom | |||||
1.0 M | 7.2 | 1.0 m transom | |||||
1.2 M | 9.8 | 1.2 m transom | |||||
1.8 M | 15 | 1.8 m transom | |||||
2.4 M | 21 | 2.4 m transom |
Step down bracket
The first step onto a stair access or ladder access is always difficult due to site constraints, ground levels and base outs. The use of the adjustable step down bracket gives the comfort of adjustment to balance the variables so the step becomesbalanced when getting on or getting off a stair access at ground level.
Size | Weight | Painted | Galvanised | Item Description | Quantity | ||
---|---|---|---|---|---|---|---|
0.3 M | 4.3 | one step down bracket | |||||
0.3 M | 6.5 | Two step down bracket |
Kwikstage Ledgers
Ledgers is horizontal member of the scaffold system also known as guard rails are made from 48.3 OD X 3.2 mm & 4 mm tubes. Ledgers fit into the upper ÒVÓ Pressings on the standards.
Size | Weight | Painted | Galvanised | Item Description | Quantity | ||
---|---|---|---|---|---|---|---|
0.7 M | 3.9 | 0.7 m ledger | |||||
1.2 M | 5 | 1.2 m ledger | |||||
1.8 M | 7.6 | 1.8 m ledger | |||||
2.4 M | 9.3 | 2.4 m ledger |
Kwikstage Tie Bars
Tie bars have pins at each ends which fit in holes of 2 and 3 board stage brackets (hopups) to prevent the brackets from spreading and the planks from becoming dislodged
Size | Weight | Painted | Galvanised | Item Description | Quantity | ||
---|---|---|---|---|---|---|---|
0.7 M | 2.5 | 0.7 m tie bar | |||||
1.2 M | 3.6 | 1.2 m tie bar | |||||
1.8 M | 5.2 | 1.8 m tie bar | |||||
2.4 M | 7 | 2.4 m tie bar |